Planning and System Types

Irrigation Systems for Allotments

How to irrigate an allotment with no tap or power: site rules, water butts and IBCs, gravity and solar-pumped drip, ollas, and which crops to water first.

On this page
  1. What makes allotment irrigation different
  2. Check your site rules first
  3. Securing a water supply on the plot
  4. Getting pressure without mains: gravity and solar pumps
  5. Systems that work on allotments
  6. Which crops to prioritise
  7. Making every litre count
  8. Security and winter care

Watering an allotment is a different problem from watering a back garden. There may be no tap on your plot, no electricity, rules about hoses, and days or weeks between visits. The best allotment irrigation systems are built around those limits. Usually that means harvesting and storing water on the plot, using gravity or a small solar pump, and putting what water you have straight onto the roots of the crops that need it most.

If you just want a quick shortlist, see what are some good watering systems for allotments.

What makes allotment irrigation different

  • Water access. Many sites have shared troughs or standpipes rather than a tap on each plot.
  • No power. Mains-powered controllers and pumps usually aren’t an option.
  • Low pressure. Water stored on the plot has only the pressure gravity gives it.
  • Visit frequency. A system has to work for several days on its own.
  • Rules. Sites often restrict hoses, sprinklers or connecting anything to the communal supply.
  • Security. Expensive kit left on a plot can attract theft.

Check your site rules first

Before buying anything, read your tenancy agreement or ask the site committee:

  • Are hoses allowed? Some sites allow them only for filling butts, or only at certain times.
  • Are sprinklers or automatic timers banned on the communal supply?
  • Can you put up water butts, IBCs or gutters on sheds and greenhouses?
  • Are there restrictions during droughts?

Rules vary a lot from site to site, and breaking them can cause disputes or risk your tenancy.

Securing a water supply on the plot

Water butts and IBCs

Standard water butts hold a couple of hundred litres. Intermediate bulk containers (IBCs) hold around 1,000 litres and are popular on allotments. If you use an IBC:

  • Check what it held before. Avoid any that contained toxic chemicals, and clean it thoroughly.
  • Keep light out. Wrap or paint it to limit algae.
  • Put it on a firm, level base. A full IBC weighs about a tonne.
  • Cover it and secure the lid. This keeps out debris, mosquitoes and children.

Collecting from shed and greenhouse roofs

Rain falling on a roof can be guttered straight into storage. As a rough guide, each millimetre of rain on each square metre of roof yields about one litre, before losses. A 2 × 3 m shed roof (6 m²) could therefore collect around 60 litres from a 10 mm downpour. That adds up over a season, but it shows why a single small roof rarely keeps a whole plot going through a dry spell. Connecting several butts in series helps.

Getting pressure without mains: gravity and solar pumps

Water pressure from stored water depends on height. Every metre the water surface sits above the outlet adds only about 0.1 bar (roughly 1.4 psi). A butt raised half a metre on blocks gives a few hundredths of a bar. That’s enough to trickle through short runs of low-pressure drip or leaky hose, but nowhere near enough for sprinklers or standard mains-pressure drippers.

Ways to work with this:

  • Raise the storage as high as is safe and stable.
  • Use gravity-rated drip. Some kits are designed to run at very low pressure from a butt.
  • Keep runs short and level. Water won’t push uphill or far at these pressures.
  • Add a small solar or battery pump. Solar irrigation kits pump from a butt to drippers on sunny days, which is when plants need water most. Check the pump’s flow rate and how many drippers it can supply.
  • Use a low-pressure timer. Many tap timers need some pressure to work. Some valves are designed for gravity systems.

Systems that work on allotments

Situation System that tends to work
Tap on the plot, hoses allowed Tap timer, filter, regulator and drip or leaky hose, as in a garden
Butt or IBC, can visit every few days Gravity drip or leaky hose on short runs, opened by hand or by a gravity valve
Butt or IBC, rare visits Solar pump feeding drippers, plus ollas for key plants
No storage, watering cans only Ollas, buried bottles and deep, infrequent watering into planting basins
Polytunnel or greenhouse Gravity or solar drip from a butt filled by its own roof, or capillary matting for trays

Our guide to leaky hose and soaker hose irrigation explains why porous hose performs unevenly at very low pressure. Keep those runs especially short. For upcycled ideas such as bottles, buckets and ollas, see DIY garden irrigation.

Which crops to prioritise

When water is limited, put it where it makes the most difference:

  • Transplants and newly sown seeds: they need moisture until their roots establish.
  • Fruiting crops such as tomatoes, courgettes, squash, beans and peas, especially while flowering and setting fruit.
  • Leafy crops such as salad and spinach, which can bolt or turn bitter if they’re stressed.
  • Crops in pots and grow bags, which dry out fastest.

Established perennials such as rhubarb, asparagus and fruit bushes, and deep-rooted crops later in the season, generally cope better with less frequent watering. Root crops like carrots and parsnips can split if watering swings from dry to very wet, so steady, moderate watering usually beats occasional floods.

Making every litre count

  • Mulch heavily with compost, straw or well-rotted manure to cut evaporation.
  • Water deeply and less often, so roots grow down rather than staying near the surface.
  • Water in the morning or evening, not at midday.
  • Make planting basins or sink a pot beside thirsty plants so water goes straight to the roots.
  • Improve the soil with organic matter over time. It helps sandy soil hold water and helps clay absorb it.
  • Group crops by water need, so the drip line serves only the plants that need it. See how to divide your garden into irrigation zones.

Security and winter care

Use inexpensive, unbranded parts where you can. Lock or hide solar panels and pumps, and take timers home over winter. Before the first hard frost, drain butts’ outlets, tubing and pumps so trapped water can’t freeze and split them.

For a broader look at choosing a watering setup, see our guide to planning a garden irrigation system.

The complete guide to planning and system types

Planning a Garden Irrigation System: How to Choose the Right Setup
Read the guide

Keep exploring

Guides from other topics

All topics →