Greywater is lightly used household water from baths, showers, bathroom basins and washing machines. Reusing it in the garden can save a lot of mains water, especially during droughts and hosepipe bans. It isn’t clean water, though. It can carry bacteria, soap residues, salts and lint. Used carefully, it’s widely considered suitable for watering ornamental plants and established trees and shrubs. Used carelessly, it can harm soil and plants and create health risks. This guide sets out the precautions that are commonly recommended.
What counts as greywater
Commonly used:
- Bath and shower water
- Bathroom basin water
- Washing machine rinse and wash water, though not from nappy (diaper) loads
Usually excluded or treated with caution:
- Kitchen sink and dishwasher water: often high in grease, food particles and strong detergents. Many guidelines exclude it, or class it separately.
- Toilet water: this is blackwater, not greywater. Never use it.
- Water used to wash nappies, or soiled clothing: higher risk of pathogens.
- Water containing bleach, disinfectants, dyes, solvents or harsh cleaning chemicals.
Is greywater safe for the garden? The short answer
For most households, it’s widely considered reasonably safe to use on ornamental plants and established trees and shrubs, provided you follow sensible precautions. The main risks are:
- To people: germs from the household can be present in greywater. The precautions below are designed to stop people (especially children) and pets from coming into contact with it, and to keep it off food you eat.
- To plants and soil: salts (especially sodium), boron and high pH from some soaps and detergents can build up in the soil over time and damage plants.
Health and environmental guidance varies by country. If in doubt, follow your local authority’s advice.
Safe-use rules
These precautions appear in most greywater guidance:
- Don’t store untreated greywater. Use it the same day, ideally within 24 hours. Stored greywater quickly turns smelly, and bacteria multiply.
- Apply it to the soil, not as a spray. Pour or pipe it onto the ground or under mulch. Avoid sprinklers, which create a fine mist people can breathe in or touch.
- Keep it off the edible parts of food crops. Don’t use it on leafy salads, herbs or root vegetables eaten raw. Some guidance allows use around fruit trees, where the fruit doesn’t touch the water. Washing produce is always sensible.
- Don’t let it pool or run off onto paths, neighbours’ land, or into streams and ponds.
- Keep children and pets away from areas where it has just been applied.
- Stop using it when someone in the household is ill with a stomach bug or infection.
- Don’t use it if it smells foul, is very dirty, or contains anything you wouldn’t want in the soil.
- Keep greywater systems physically separate from the drinking water supply. There should be no cross-connections. See do you need a backflow preventer for garden irrigation.
Choosing soaps and detergents
What goes down the drain ends up in your soil. If you plan to reuse greywater, it helps to switch to plant-friendlier products:
- Low sodium. Powdered laundry detergents can be high in sodium salts, which build up in soil and harm its structure. Liquid detergents are often lower in sodium, but check the label.
- No boron or borax. Boron is toxic to plants at quite low levels.
- No bleach, softeners or antibacterial additives in loads you’ll reuse.
- Products labelled as greywater-safe or suitable for septic systems can be a useful starting point, though labels vary in what they mean.
Which plants to water (and which to avoid)
Generally suitable:
- Established trees and shrubs, especially fruit trees, where the fruit doesn’t contact the water
- Established ornamental borders
- Lawns, when applied below the surface or carefully at ground level rather than sprayed
Generally avoid:
- Leafy salads, herbs and root crops eaten raw
- Seedlings and young transplants
- Acid-loving plants such as azaleas, camellias, rhododendrons and blueberries, because greywater from many detergents tends to be alkaline
- Plants in pots, where salts concentrate quickly
- Plants that are already struggling
Ways to get greywater into the garden
- Bucketing: the simplest method. Bail bath or shower water into buckets and pour it onto the soil around shrubs. Lift with care; a full bucket is heavy.
- Diverter with a hose: a device fitted to the bath or washing machine outlet that sends water out to a hose, which you move between plants. Use it at ground level, not as a spray.
- Laundry-to-landscape: the washing machine pump pushes water through a pipe to mulch-filled basins around trees and shrubs. It’s popular in some US states. Check local rules.
- Branched drain systems: gravity-fed pipes from a shower or bath split the flow between several mulch basins.
- Treated systems: commercial systems filter and treat greywater, sometimes for drip irrigation or toilet flushing. These usually need approval and professional installation.
Untreated greywater generally isn’t suitable for standard drip emitters. Lint, hair and soap scum block them quickly. Where drip is used with greywater, it’s usually with treatment and filtration designed for the purpose. For more on drip parts, see irrigation system components.
Protecting your soil over time
- Rotate where you apply it, so no single area gets greywater every time.
- Alternate with rainwater or mains water to help flush salts down past the roots, especially in dry climates.
- Watch the plants. Yellowing, scorched leaf edges or poor growth can signal salt build-up.
- Test the soil occasionally if you use greywater heavily, for pH and salinity.
- Mulch well. Mulch helps filter the water and supports soil life.
Rules and permissions
Regulations differ widely:
- UK: bucketing bath water onto the garden is common practice and isn’t generally regulated. Installed greywater recycling systems must comply with building and water fittings regulations, and must not connect to the drinking supply.
- US: rules vary by state. Some, such as California, allow simple laundry-to-landscape systems without a permit if they meet set conditions. Others require permits or restrict greywater use.
- Australia: states and councils set requirements, and approved treatment systems may be needed for some uses.
Check with your local council, water authority or health department before installing any permanent greywater system.
Greywater is one of several ways to reduce mains water use. For others, see building a PVC rainwater harvesting system and our guide to planning a garden irrigation system.