Size a drip irrigation system step by step: measure supply flow and pressure, estimate plant water needs, add up emitter flow, plan zones and set run times.
Choose the right drip irrigation filter: recommended mesh sizes, mesh vs. micron, screen vs. disc filters, sizing for flow, placement and cleaning tips.
How to design drip irrigation on a slope: elevation and pressure, PC and check-valve emitters, laying lines on contour, zoning by height, and stopping runoff.
Typical drip irrigation operating pressures by component, how to measure static and working pressure, choosing a regulator, and fixing high or low pressure.
Design a gravity-fed drip system from a tank or rain barrel: how much pressure height gives, layout tips, and how to size, space and drill emitter holes.
How to calculate drip irrigation drip rate: measure emitter output with a cup and timer, convert ml/min to GPH or L/h, and work out zone flow and run times.
How many drip emitters trees and shrubs need, where to place them for new and established plants, and how to balance flow and run times on a shared zone.
What the uniformity coefficient means for drip irrigation, how CU, DU and emission uniformity are calculated, and a simple catch-cup test for home systems.
How venturi fertilizer injectors work in drip systems, what pressure difference they need, how to install and calibrate one, and how to fertigate safely.
Drip irrigation is commonly cited at about 85–95% efficiency. Learn what that figure means, how drip compares with sprinklers, and what keeps it efficient.