Subsurface and Buried Watering

Olla Irrigation: How Buried Clay Pot Watering Works

How olla irrigation works: buried unglazed clay pots that seep water into the soil as it dries. Learn placement, sizing, refilling, DIY options and limits.

On this page
  1. What an Olla Is
  2. How Olla Irrigation Works
  3. Where Ollas Work Best (and Where They Don’t)
  4. Choosing Size and Placement
  5. How to Install an Olla
  6. Refilling, and Automating Ollas
  7. Making Your Own Olla From Terracotta Pots
  8. Care and Troubleshooting
  9. Ollas vs. Drip and Wicking Systems

What an Olla Is

An olla (pronounced “OY-yah”) is an unglazed clay pot buried in the soil up to its neck and filled with water. The water slowly seeps out through the porous clay walls into the surrounding soil, where nearby plant roots take it up. You top it up by hand every so often. There’s no tubing, no pump and no electricity.

The idea is very old. Buried clay pot irrigation has been used in various parts of the world for a long time, and is often traced back roughly two thousand years. Today ollas are popular with home gardeners for raised beds, vegetable patches, containers and dry-climate gardens.

Ollas are one of the simplest forms of subsurface irrigation: water is delivered underground, straight to the root zone, without wetting the surface.

How Olla Irrigation Works

Unglazed, low-fired clay is full of tiny pores. When the pot is full of water and buried, two things drive water out through those pores:

  • Soil suction. Dry soil pulls water toward itself through capillary action (also called soil moisture tension). The drier the surrounding soil, the stronger the pull, and the faster water moves out through the clay walls.
  • Root uptake. As roots near the olla absorb water, they dry the soil next to the pot, which draws more water out.

When the soil around the olla is already moist, for example after rain, the pull weakens and seepage slows down. That gives ollas a degree of self-regulation: they tend to release more water when the soil is dry and less when it’s wet. They aren’t perfectly precise, and seepage also depends on the clay, soil type and temperature, but this is why ollas waste relatively little water.

Because water is released below the surface:

  • little is lost to evaporation or runoff,
  • the soil surface stays relatively dry, which can mean fewer weeds, and
  • roots tend to grow toward and around the olla.

Water moves through the soil mainly by capillary action, the same principle behind wicking beds and capillary irrigation.

Where Ollas Work Best (and Where They Don’t)

Good fits:

Less suitable:

  • Lawns and large areas. You’d need too many pots.
  • Plants far from the olla. The wetted zone is limited, so plants need to be close.
  • Deep-rooted trees and large shrubs, which have roots well beyond an olla’s reach (though very large ollas or several pots can help young trees).
  • Seeds sown at the surface, which still need surface watering to germinate.
  • Very sandy soil, where water moves mostly downward and spreads less sideways.

Choosing Size and Placement

Ollas come in many sizes, from small pots for containers to large ones holding a few gallons. Larger ollas hold more water, so you refill them less often, and they generally wet a wider area.

How far does an olla water? It depends on its size and your soil. Water spreads farther sideways in loam and clay than in sand. Manufacturers usually state a recommended planting radius for each size, and that’s a good starting point. In general, plant within a short distance of the olla wall, closer in sandy soil, and give plants at least a little supplemental surface watering until their roots reach the pot.

Placement tips:

  • Put the olla in the middle of a group of plants rather than at the edge of the bed.
  • In a long bed, space several ollas so their wetted zones overlap slightly.
  • Plant seedlings or transplants close to the pot so roots reach it quickly.
  • Avoid placing ollas where you’ll dig often, since buried clay is easy to crack with a spade.

How to Install an Olla

  1. Dig a hole slightly wider than the olla, deep enough that the neck and opening will sit just above the soil surface.
  2. Set the olla upright in the hole. Keep the opening above ground so soil and debris don’t wash in.
  3. Backfill firmly around the pot with soil, pressing gently so the soil touches the clay all around. Air gaps reduce how well water moves out.
  4. Fill it with water and put the lid on. A lid cuts evaporation and keeps out mosquitoes, debris and small animals.
  5. Water the surrounding soil from the top for the first few days to settle the soil and help new plants get going.
  6. Plant around the olla if you haven’t already, and mulch the surface.

Refilling, and Automating Ollas

How often you refill depends on the olla’s size, your soil, the weather and the plants around it. In hot weather, with large plants drawing on it, a small olla may need topping up every day or two. In cooler weather, or with a larger olla, it may go a week or more. Check the water level regularly at first to learn your garden’s rhythm.

Don’t let ollas sit empty for long stretches in hot weather, or the plants relying on them will dry out.

To cut down on refilling:

  • Choose larger ollas where space allows.
  • Connect ollas to a drip line or reservoir. Some systems link several ollas together and feed them from a tank or a hose with a float valve, so they stay topped up automatically.
  • Mulch well around the pot to slow moisture loss from the soil.

Making Your Own Olla From Terracotta Pots

A common DIY method uses two identical unglazed terracotta pots:

  1. Choose plain, unglazed, untreated terracotta pots. Glazed, painted or sealed pots won’t let water through.
  2. Seal the drainage hole of one pot. Gardeners use a cap, a piece of tile, or a waterproof sealant. If you’re growing edibles, choose a sealant suitable for the purpose and check its label.
  3. Join the two pots rim to rim with a waterproof sealant, creating a closed chamber.
  4. The open drainage hole of the top pot becomes the fill hole. Cover it with a stone, saucer or cap.
  5. Let the sealant cure fully, following its instructions, before burying and filling.

DIY ollas made from thick, high-fired pots may seep more slowly than purpose-made ollas. Test one before making a batch.

Care and Troubleshooting

  • Winter. Water freezing inside clay can crack it. In areas with hard freezes, empty ollas before winter. Some gardeners lift and store them.
  • Slower seepage over time. Minerals from hard water, algae or biofilm can gradually block the pores. When an olla is out of the ground, scrub it with a stiff brush and plain water.
  • Mosquitoes. Keep a lid on to stop mosquitoes breeding in the standing water.
  • Roots wrapping the pot. Roots often grow tightly around ollas. Lift pots carefully at the end of the season to avoid breaking them.
  • Water draining too fast. Check for cracks. A hairline crack can make an olla empty much faster than expected.
  • Plants still wilting. They may be too far from the olla, the pot may be too small for the plants’ needs, or it may simply need refilling more often in hot weather.

Ollas vs. Drip and Wicking Systems

Ollas Subsurface drip Wicking beds
Setup Bury pots, fill by hand Valve, filter, regulator, dripline Lined bed with water reservoir
Power or pressure None Mains pressure or pump None
Automation Optional with reservoir or float valve Easy with a controller Refill on a schedule
Best scale Small beds and containers Beds, lawns, larger areas Individual raised beds
Main upkeep Refilling, winter care Filter cleaning, flushing Refilling, flushing salts

For larger gardens, buried dripline is usually more practical. Our guide to subsurface drip irrigation components and installation covers how it’s built, and how deep should subsurface drip line be buried? helps with planning. For a single raised bed you’d rather not refill often, a wicking bed is another low-tech option. Many of the reasons gardeners like ollas, such as water savings, fewer weeds and dry foliage, are the same ones listed in the 7 advantages of drip irrigation.

The complete guide to subsurface and buried watering

Subsurface Drip Irrigation: Components and Installation
Read the guide

Keep exploring

Guides from other topics

All topics →