The Short Answer
A drip irrigation system has four groups of components:
- A head assembly at the water source: backflow preventer, timer, filter and pressure regulator.
- Tubing to carry water: a mainline (usually 1/2-inch poly tubing in home gardens), plus 1/4-inch micro-tubing, inline emitter tubing or drip tape.
- Emitters that release water to plants: drippers, bubblers or micro-sprays.
- Fittings and accessories: tees, elbows, couplings, end caps, stakes, a hole punch and goof plugs.
The rest of this article explains what each part does and which ones a simple garden system really needs.
The Head Assembly
The head assembly connects the system to the tap or valve and prepares the water for drip. A typical order from the tap is: backflow preventer, timer, filter, pressure regulator, then the tubing adapter. Some products combine several of these; follow the flow arrows printed on each part.
Backflow Preventer
A backflow preventer stops water from the garden system, which may contain soil, fertilizer or bacteria, from being siphoned back into your drinking water supply. Many local plumbing codes require one on irrigation connections. A simple hose-thread vacuum breaker is common on taps; some taps and timers have one built in. Larger permanent systems may need a specific type of backflow device under local rules.
Timer or Controller
A timer turns the water on and off automatically. Battery hose-end timers screw onto a tap and suit most small gardens; multi-outlet versions can run two or more zones on separate schedules. Larger systems use valves wired to an irrigation controller. A timer is optional, but it is what makes drip truly low-effort.
Filter
Drip emitters have very small passages, and even fine grit can block them. A filter removes particles before they reach the tubing. Screen and disc filters are the most common for home use. Filters for home drip are commonly in the range of 150 to 200 mesh, but follow the minimum the emitter or dripline maker specifies. Choose one you can open and clean easily.
Pressure Regulator
Household water pressure is often 40 to 80 psi or more, while drip parts are designed for much less. Poly tubing with emitters commonly runs around 15 to 30 psi, and drip tape and soaker lines lower still, often about 10 psi. A regulator reduces the pressure to a steady level, which stops fittings blowing off and keeps emitter output consistent. Regulators are rated for a pressure and a flow range, so choose one that matches your parts and your zone’s flow.
Tubing
- Mainline tubing: usually 1/2-inch polyethylene (sometimes 3/4-inch for long runs). It carries water through the garden, and emitters or branch lines connect to it. Note that “1/2-inch” tubing comes in several slightly different outside diameters from different brands, so fittings must match your tubing’s exact size.
- 1/4-inch micro-tubing (also called distribution or “spaghetti” tubing): branches from the mainline to individual plants or pots. Keep these runs short; University of Arizona extension guidance suggests no more than about 5 feet.
- Inline emitter tubing (dripline): tubing with emitters built in at regular spacing, such as every 6, 12 or 18 inches. It suits beds and rows.
- Drip tape: thin-walled, flat tubing with built-in emitters, designed for straight vegetable rows at low pressure. See drip tape for vegetable rows.
- Rigid PVC pipe: sometimes used for mains or buried supply lines, and in homemade systems like a DIY PVC drip setup.
Emitters and Other Outlets
Emitters set how much water each plant gets. Flow is rated in gallons per hour (gph) or litres per hour, commonly 0.5, 1, 2 or 4 gph.
- Pressure-compensating (PC) emitters keep roughly the same output across a range of pressures, which helps on slopes and long runs. Many are also self-flushing.
- Non-PC emitters are cheaper and their output varies with pressure. They work fine on flat, short runs and can suit low-pressure gravity systems.
- Adjustable emitters let you change the flow by twisting a cap.
- Bubblers release more water over a wider area, useful for trees and large shrubs.
- Micro-sprays and microjets spray a small area and suit dense groundcover or plants with wide root zones. See micro irrigation kits and microjet layout.
Fittings and Accessories
- Fittings: tees, elbows, couplings and adapters join tubing. Types include barbed, compression and locking fittings; choose one style and match it to your tubing’s outside diameter.
- End closures: end caps, figure-8 closures or flush valves seal the end of each run and let you flush out debris.
- Stakes and hold-downs: keep tubing and emitters in place.
- Hole punch: makes clean holes in 1/2-inch tubing for emitters and 1/4-inch barbs. Our guide to installing drip emitters covers the technique.
- Goof plugs: small plugs that seal holes you punched in the wrong place.
- Shut-off valves: small inline valves let you turn individual branches on and off.
Optional Extras
- Fertilizer injector: adds liquid fertilizer to the water as it flows (fertigation). Use one with a backflow device appropriate for chemical injection, as local rules may require.
- Air-relief valve: used mainly on buried driplines to stop soil being drawn into emitters when the system drains.
- Rain or soil-moisture sensor: pauses watering when it isn’t needed, if your timer supports one.
- Pressure gauge: a cheap way to check what your tap and regulator are actually delivering.
Which Components Do You Actually Need?
For a typical raised bed or small vegetable garden on a household tap, a sensible minimum is:
- A backflow preventer (if the tap or timer doesn’t include one)
- A filter
- A pressure regulator
- 1/2-inch tubing and matching fittings
- Inline emitter tubing or individual emitters
- End caps, stakes, a hole punch and a few goof plugs
- A timer, if you want automatic watering
If your source is a rain barrel or other gravity supply, the list changes: you would usually leave out the regulator and choose low-pressure parts, as explained in drip irrigation from a rain barrel. For how all these parts fit together in a full design, see the home drip irrigation guide.