Home Drip Installation

Greenhouse Drip Irrigation and Arrow Drippers

How to set up drip or trickle irrigation in a greenhouse: arrow drippers explained, layouts for pots, grow bags and beds, water supply, scheduling and feeding.

On this page
  1. Why Drip (Trickle) Irrigation Suits Greenhouses
  2. What Arrow Drippers Are
  3. Greenhouse Drip Layouts
  4. Water Supply, Filtration and Pressure
  5. Scheduling Greenhouse Drip
  6. Feeding Through the Drip System
  7. Maintenance and Common Problems

Why Drip (Trickle) Irrigation Suits Greenhouses

Drip irrigation, sometimes called trickle irrigation, is widely used in greenhouses from hobby lean-tos to commercial glasshouses. Indoors, it has a few particular advantages:

  • Drier foliage and air. Overhead watering raises humidity and leaves water on leaves, which favours many fungal diseases in an enclosed space. Drip applies water to the root zone and keeps foliage dry.
  • Precise amounts. Pots and grow bags hold a limited volume of growing medium, so they need accurate, regular watering. Drip gives each container the same measured amount.
  • Automation. A greenhouse can heat up and dry plants out very quickly on a sunny day. A timer keeps watering going when you’re not there.
  • Feeding. Liquid fertilizer can be added to the water and delivered with every watering.

What Arrow Drippers Are

Arrow drippers, also called stake or spike drippers, are small plastic stakes with a pointed tip that pushes into the growing medium. Water arrives through a thin microtube and runs down a channel in the stake into the medium right beside the plant’s roots. They are a standard way to water pots, grow bags, slabs and troughs in greenhouses and nurseries.

Their main advantages are that they stay put, deliver water exactly where you want it in each container, and are easy to move between pots.

How Arrow Drippers Connect

Most arrow drippers do not control flow on their own. The usual assembly is:

  1. A lateral line (often 16 mm or 1/2-inch poly tubing) runs along the bench or row.
  2. A dripper, often pressure-compensating and sometimes with an anti-drain feature, is punched into the lateral. This sets the flow, for example a few litres per hour.
  3. A manifold or splitter on the dripper outlet divides the flow into two or four outlets.
  4. Microtubes, thin tubes commonly around 3 mm inside diameter, run from each outlet to an arrow in a separate pot or a different spot in the same grow bag.

These pre-assembled sets are often sold as “spiders” or arrow dripper kits. Some arrow types have a labyrinth built in, so they regulate flow themselves; check the specifications. The flow at each arrow is roughly the dripper’s flow divided by the number of outlets.

Straight vs Angled Arrows

  • Straight arrows point down into the medium and suit most pots and grow bags.
  • Angled arrows have a bent tip that directs water sideways onto the medium. They are often used in pots and slabs where you want water placed precisely without disturbing the surface, or where the arrow needs to sit at an angle.

Greenhouse Drip Layouts

Pots on Benches

Run a lateral along the length of each bench. Punch in a dripper for every two or four pots, depending on your manifold, and route a microtube and arrow to each pot. Keep microtubes the same length where possible, so each pot gets a similar amount. Small pots may need one arrow each; larger pots often need two on opposite sides.

Grow Bags and Troughs

Greenhouse tomatoes, cucumbers and peppers are often grown in grow bags or troughs. Run the lateral alongside the bags and use one or two arrows per plant, pushed into the medium a few centimetres from the stem. Spreading arrows along the bag helps wet the whole volume rather than one spot.

Soil Beds and Borders

In greenhouse soil borders, the same methods used outdoors work well: inline emitter tubing or drip tape along each row. See drip irrigation for raised vegetable beds and drip for tomatoes for spacing ideas.

Water Supply, Filtration and Pressure

  • Mains or tap supply: use the standard head assembly of backflow preventer, filter, pressure regulator and timer. See the components of a drip irrigation system.
  • Rainwater tanks: many greenhouses collect water from their own roof. A tank gives very low pressure unless raised well above the benches or fitted with a pump, and pressure-compensating drippers may not work at gravity pressure. See running drip from a rain barrel.
  • Filtration: arrow drippers and microtubes have narrow passages and clog easily, particularly with stored rainwater or fertilizer residue. A good filter is essential.
  • Anti-drain drippers: these keep laterals full between waterings, so every pot starts receiving water at the same moment rather than the pots nearest the supply getting a head start.

Scheduling Greenhouse Drip

Plants in pots and soilless media such as coir or peat-based mixes hold limited water, so they are usually watered in several short pulses per day in warm, bright conditions rather than one long session. Soil borders hold more water and can be watered less often and for longer.

As a practical approach:

  • Start with a short run once or twice a day in warm weather, and check how moist the medium is before the next run.
  • Aim for a small amount of drainage from pots and bags after watering. This helps prevent salts from fertilizer building up, while heavy runoff wastes water and nutrients.
  • Increase watering on hot, sunny days and as plants grow; reduce it in cool, cloudy spells and in winter.
  • Weigh or lift a few pots to get a feel for wet and dry weights.

Feeding Through the Drip System

Fertigation, adding liquid fertilizer to the irrigation water, is common in greenhouses. A small venturi or proportional injector, or a stock tank, adds fertilizer at a set rate. Use backflow protection appropriate for chemical injection, follow fertilizer label rates, flush the lines with plain water periodically to reduce residue in microtubes, and clean the filter more often.

Maintenance and Common Problems

Problem Likely cause Fix
Some pots dry, others wet Clogged arrows or microtubes; uneven tube lengths Clean or replace arrows; even out tube lengths
Arrows popping out of pots Medium shrinking or arrows not pushed in far enough Push in firmly; use longer arrows
Algae inside microtubes Light reaching water in translucent tubing Use dark or opaque tubing; flush periodically
White crust on the medium Salt build-up Allow a little more drainage; flush with plain water
Pots nearest the supply get more water Lines draining between runs Use anti-drain or pressure-compensating drippers

At the end of a growing season, flush the system, soak arrows and microtubes to remove deposits, and check drippers before replanting. For planning a garden-wide system, see the home drip irrigation guide.

The complete guide to home drip installation

Home Drip Irrigation: Planning and Installing a Garden Drip System
Read the guide

Keep exploring

Guides from other topics

All topics →