The Short Answer
A pressure-compensating (PC) emitter delivers close to the same flow rate across a range of water pressures. A non-compensating (non-PC) emitter lets more water through when pressure rises and less when it falls.
That makes PC emitters the better choice on slopes, long runs and larger systems, where pressure varies from one end of the line to the other. Non-compensating emitters are fine, and usually cheaper, for short, level runs and for very low-pressure systems such as gravity-fed rain barrels, where PC emitters may not work properly.
Why Pressure Varies Across a Drip System
Even with a pressure regulator at the start of the system, pressure isn’t the same at every emitter. Two things change it.
Friction loss
As water flows through tubing and fittings, friction gradually reduces its pressure. The longer the run and the more water flowing through it, the bigger the drop. Emitters near the start of a long, heavily loaded line can see noticeably higher pressure than those at the end. Our guide to how many emitters fit on a 1/2-inch line covers the flow and length limits that keep friction loss in check.
Elevation
Water pressure changes with height: about 1 psi for every 2.31 feet of elevation. Water running downhill gains pressure, and water running uphill loses it. On a sloped garden with a few feet of drop, emitters at the bottom can get meaningfully more pressure than those at the top, a big difference when drip systems often run at only around 15 to 30 psi.
With non-compensating emitters, those pressure differences become differences in how much water each plant gets.
How Pressure-Compensating Emitters Work
Inside a PC emitter is a small flexible diaphragm, typically made of silicone or a similar material. As pressure rises, the diaphragm flexes and narrows the water passage; as pressure falls, it relaxes and opens the passage. The result is a fairly steady output across the emitter’s rated pressure range.
Two points to keep in mind:
- Every PC emitter has a working range. Below its minimum pressure, often somewhere around 10 psi depending on the product, it may not regulate properly and can deliver less than its rated flow. Above its maximum, it may stop regulating or other parts of the system may be at risk. Check the manufacturer’s specifications.
- “Steady” means close, not identical. PC emitters keep flow within a reasonably narrow band, which is a big improvement on non-compensating emitters on variable ground.
How Non-Compensating Emitters Behave
Non-compensating emitters use a fixed passage, often a winding path called a labyrinth or turbulent-flow path, or an adjustable opening. Their output rises and falls with pressure. On a short, level run with a regulator at the start, the pressure differences are small, so the flow differences are small too. On long or sloped runs, they become significant.
Adjustable emitters, which let you dial flow up or down, are almost always non-compensating. They’re handy for fine-tuning individual plants but tend to be less consistent from emitter to emitter.
Side-by-Side Comparison
| Pressure-compensating (PC) | Non-compensating (non-PC) | |
|---|---|---|
| Flow when pressure changes | Stays fairly steady within rated range | Rises and falls with pressure |
| Uniformity on slopes and long runs | Good | Can vary considerably |
| Minimum working pressure | Needs enough pressure to regulate | Works at very low pressures, just with lower flow |
| Gravity-fed and rain barrel systems | Often a poor fit | Usually the better fit |
| Cost | Usually somewhat higher | Usually lower |
| Adjustable flow | Rarely | Common |
| Best for | Slopes, long runs, larger systems, mixed elevations | Short level runs, small beds, low-pressure systems |
When to Choose Pressure-Compensating Emitters
- Sloped gardens where emitters sit at different heights.
- Long runs or lines near their flow limit, where friction loss is significant.
- Larger systems where some plants are far from the water source.
- Where uniformity matters, such as vegetable rows where every plant should get the same amount.
- When you want predictable run times. Knowing each emitter really delivers its rated flow makes calculating run times more reliable; see our guide to how long to run a drip system.
When Non-Compensating Emitters Make Sense
- Short, level runs with a pressure regulator at the start, where pressure differences are small.
- Gravity-fed systems. Gravity provides only about 0.43 psi per foot of height, so a rain barrel raised 3 feet off the ground produces only around 1.3 psi at the base, far below what most PC emitters need. Non-compensating emitters, or products specifically designed for gravity use, are usually the better fit, and you’ll need longer run times at such low flow.
- Tight budgets on small systems where PC benefits would be minimal.
- Fine-tuning individual plants with adjustable emitters.
Do You Still Need a Pressure Regulator?
In most home systems connected to household water, yes. PC emitters regulate their own output, but the tubing, fittings and other components still have maximum pressure ratings. Household pressure can exceed those ratings, and high pressure can cause fittings to leak or blow apart. A regulator protects the whole system and keeps emitters within their working range.
Should You Mix the Two Types?
It’s generally best to keep a single zone consistent: all PC or all non-PC. On a shared line, the PC emitters hold their output while the non-PC emitters drift with pressure, which makes it harder to set one run time that suits every plant. Mixing different flow rates of the same type is fine; that’s how you give larger plants more water.
Anti-Drain (Check Valve) Emitters
Some emitters, often PC models, include a check valve, sometimes labeled anti-drain or CNL. When the system shuts off, the valve closes below a certain pressure so water in the line doesn’t drain out through the lowest emitters. That helps on slopes, where low emitters would otherwise keep dripping and overwater plants at the bottom, and it means the line refills faster at the next start. Specifications vary by product.
Pressure-Compensating Drip Line
The same choice applies to inline drip line, which comes in both PC and non-PC versions. PC drip line generally allows longer runs and handles slopes better. For short, level beds, non-PC drip line can work well. Our comparison of inline drip line vs individual emitters covers when to use each format.
How to Tell Which Type You Have
Check the packaging or the emitter itself; PC emitters are usually marked “PC” or “pressure compensating.” Color coding is common, but it varies between brands, so don’t rely on color alone. If you’re unsure, a simple test helps: run the system and catch the output from emitters at the start and the end of a long or sloped line in small cups for the same amount of time. Large differences suggest non-compensating emitters, low pressure or a clog.
For more on how emitters fit into the whole system, and how soil type affects emitter choice, see our complete guide to drip irrigation and our guide to which soils suit drip irrigation.