Drip Basics

What does "drip system" mean?

A drip system is a watering setup that releases water slowly through tubing and emitters at the base of plants. Learn the parts, the jargon and how it differs.

On this page
  1. The Short Answer
  2. What “Drip” Refers To
  3. What a Drip System Is Made Of
  4. Drip System vs Soaker Hose vs Sprinkler
  5. Drip System Terms You’ll See
  6. Other Meanings of “Drip System”
  7. Is a Drip System Worth It?

The Short Answer

In gardening and landscaping, a drip system is short for a drip irrigation system: a watering setup that delivers water slowly, drop by drop, through a network of tubes and small outlets called emitters, placed at or near the base of each plant. Instead of spraying water over a whole area, it applies small amounts directly to the soil where roots can take it up.

Drip systems are used in home vegetable gardens, flower beds, shrub borders, containers, orchards, vineyards and large farms.

What “Drip” Refers To

The word “drip” describes the flow rate. Where a garden hose or sprinkler moves water in gallons per minute, a drip emitter releases it in gallons per hour (GPH), commonly somewhere between half a gallon and four gallons per hour for garden emitters. At those rates, water seeps or drips out rather than spraying.

That slow, targeted delivery is the whole point. It gives soil time to absorb water, limits evaporation and runoff, and keeps leaves dry. Our complete guide to drip irrigation explains how it works step by step.

What a Drip System Is Made Of

A typical home drip system includes:

  • A water source, usually an outdoor faucet or an irrigation valve.
  • A timer or controller to run it automatically (optional but common).
  • A backflow preventer to help protect drinking water.
  • A filter to stop particles that could clog emitters.
  • A pressure regulator to bring household pressure down to the lower level drip parts are designed for.
  • Supply tubing, usually 1/2-inch polyethylene, running along beds.
  • Emitters or drip line to release the water, either individual emitters at each plant or tubing with emitters built in. Our comparison of inline drip line vs individual emitters explains the choice.
  • Fittings and end caps to connect, branch and close off the tubing.

Drip System vs Soaker Hose vs Sprinkler

Drip system Soaker hose Sprinkler
How water comes out Through emitters at set points Seeps along the porous length of the hose Sprayed through the air
Flow control Precise; each emitter has a rated flow Rough; output varies along the hose and with pressure Set by nozzle and pressure
Best for Beds, shrubs, trees, containers, rows Short, straight runs in beds Lawns and large open areas
Leaves get wet No No Yes

A soaker hose is sometimes loosely called a drip system, and it works on a similar principle, but it doesn’t use discrete emitters and is generally less uniform. Sprinklers work very differently; our article on drip vs sprinkler irrigation compares the two.

Drip System Terms You’ll See

Term What it means
Emitter or dripper The small device that releases water at a set rate
GPH Gallons per hour, the usual flow rating for emitters
Point-source emitter A single emitter placed at one spot, such as beside a shrub
Inline drip line (emitter tubing) Tubing with emitters built inside at regular intervals
Drip tape Thin-walled, lay-flat tubing used mainly for row crops, often for a season or a few seasons
Supply line or mainline The larger tubing, often 1/2 inch, that carries water through the garden
1/4-inch tubing (spaghetti tubing) Small tubing that branches off the supply line to individual plants
Pressure-compensating (PC) An emitter that keeps a steady flow over a range of pressures; see our explainer on pressure-compensating vs non-compensating emitters
Pressure regulator A device that lowers incoming water pressure to suit drip parts
Micro-irrigation or low-volume irrigation The broader family that includes drip, micro-sprays and bubblers
Subsurface drip Drip line buried below the soil surface
Fertigation Adding soluble fertilizer to irrigation water

When you start sizing a system, you’ll also need to know how many emitters a single line can handle; our guide to how many emitters fit on a 1/2-inch line covers that.

Other Meanings of “Drip System”

Outside gardening, “drip” turns up in other contexts. In medicine, a “drip” usually refers to an intravenous (IV) drip, which delivers fluids or medication into a vein; questions about that belong with a healthcare professional. “Drip” can also describe a style of coffee brewing. On this site, “drip system” always means drip irrigation.

Is a Drip System Worth It?

For many gardens, yes, especially for vegetables, beds, shrubs, trees and containers, and in dry or hot climates where water is precious. Drip usually uses water more efficiently than sprinklers and saves the time spent hand watering. It does need some planning and occasional maintenance, mainly keeping the filter clean and checking for clogged or dislodged emitters. For lawns, sprinklers are usually the more practical choice.

The complete guide to drip basics

Drip Irrigation Explained: How It Works and Why It's Worth It
Read the guide

Keep exploring

Guides from other topics

All topics →