Automatic Watering

How to Program an Irrigation Controller: Start Times, Run Times and Zones

Step-by-step guide to programming an irrigation controller: start times, run times, programs, watering days, cycle and soak, seasonal adjust and testing.

On this page
  1. The four settings every controller needs
  2. Before you start: map your zones
  3. Step 1: Set the date and time
  4. Step 2: Choose a program (A, B, C)
  5. Step 3: Set the start time (and the common mistake)
  6. Step 4: Set run times for each zone
  7. Step 5: Choose watering days
  8. Step 6: Use cycle and soak for slopes and clay
  9. Step 7: Set seasonal adjust
  10. Step 8: Return to Auto/Run and test
  11. Example schedule
  12. Programming a smart controller
  13. Troubleshooting common programming problems

Programming an irrigation controller comes down to four settings: the current date and time, a start time, a run time for each zone, and the days to water. The details vary by brand, but the logic is the same on Hunter, Rain Bird, Orbit, Toro and most other residential controllers. Smart controllers just add an app and some automation on top.

This guide walks through each step, explains the most common programming mistake, and shows how to work out run times so you’re not guessing.

The four settings every controller needs

  • Current date and time: so the schedule runs when you expect.
  • Start time: when a program begins watering.
  • Run time (station time): how many minutes each zone waters.
  • Watering days: which days the program runs, such as specific weekdays, every few days, or odd or even dates.

Most controllers group these into programs (often labeled A, B and C), each with its own start times and watering days.

Before you start: map your zones

Walk the property and run each zone manually, using the controller’s manual or test function, and note:

  • Zone number and location
  • What it waters (lawn, shrubs, vegetables, containers)
  • Head type: spray heads, rotors or drip
  • Sun or shade, slope, and soil type if you know it

Write this on a card and keep it inside the controller door. It makes programming, and future troubleshooting, much easier.

Step 1: Set the date and time

Turn the dial or open the menu to Date/Time (or Current Time). Use the + and – buttons and the arrow keys to set the year, month, day and time, and double-check AM/PM. On smart controllers this usually happens automatically once the controller is online.

Step 2: Choose a program (A, B, C)

Use separate programs for zones with very different needs. A common setup:

  • Program A: lawn zones (sprays and rotors)
  • Program B: shrub and flower bed zones
  • Program C: drip zones for vegetables and containers

If all your zones are similar, one program may be enough.

Step 3: Set the start time (and the common mistake)

Turn to Start Times and enter the time you want the program to begin. Early morning is usually best, so watering finishes before the day heats up. See what time of day your irrigation system should run.

The common mistake: a start time applies to the whole program, not to individual zones. When the program starts, the controller runs zone 1 for its run time, then zone 2, then zone 3, and so on, one after another.

If you enter a separate start time for each zone, say 5:00, 5:15 and 5:30 in a three-zone program, the controller runs all three zones at each of those times, watering everything three times. This is one of the most frequent causes of overwatering.

Use additional start times only when you deliberately want the whole program to repeat, for example for new sod or cycle and soak (step 6).

On most residential controllers, if two programs’ start times overlap, the second program waits until the first finishes rather than running at the same time. Check your manual, because running two zones at once can drop pressure.

Step 4: Set run times for each zone

Turn to Run Times (or Station Times) and enter the minutes for each zone. Zones set to zero don’t run in that program.

How to work out run times (catch-cup test)

Different heads apply water at very different rates, so the same number of minutes can mean very different amounts of water. To find out what each sprinkler zone actually applies:

  1. Place several straight-sided cans or cups around the zone.
  2. Run the zone for a set time, for example 15 minutes.
  3. Measure the water depth in each cup and average them.
  4. Work out the rate: if the cups average 0.25 inch in 15 minutes, the zone applies about 1 inch per hour.
  5. Calculate run time: minutes = (inches you want to apply ÷ inches per hour) × 60. To apply half an inch at 1 inch per hour, run 30 minutes.

The test also shows uneven coverage: if some cups have much less water than others, fix the heads before adding minutes.

Typical starting points by head type

These are rough starting points to refine with the catch-cup test and by watching your plants:

  • Spray heads apply water fast, so run times per cycle are usually short.
  • Rotors apply water much more slowly and need noticeably longer run times than sprays to apply the same depth.
  • Drip zones apply water slowly at the root zone and often need the longest run times. Base them on emitter flow and how much water the plants need, not on sprinkler minutes.

Never mix sprays and rotors on the same zone; they can’t be scheduled correctly together.

Step 5: Choose watering days

Turn to Water Days (or Schedule) and choose one option:

  • Days of the week, for example Monday, Wednesday and Saturday
  • Interval, for example every 3 days
  • Odd or even dates, often used to comply with local restrictions

Check your local watering rules first; many areas restrict days or times. In general, watering deeply and less often encourages deeper roots than short daily watering, though sandy soil, containers and new plantings may need more frequent watering.

Step 6: Use cycle and soak for slopes and clay

If water runs off before the zone finishes, the soil can’t absorb it as fast as the heads apply it. Instead of one long run, split the time into shorter cycles with a soak period between them:

  • Set the zone’s run time to a shorter cycle length.
  • Add a second (or third) start time to the program, spaced far enough apart for water to soak in, often about an hour.

Many newer controllers have a built-in cycle and soak setting per zone that handles this automatically. Remember the start-time rule: extra start times repeat every zone in that program, so put zones that need cycle and soak in their own program if the others don’t.

Step 7: Set seasonal adjust

Seasonal adjust (or water budget) scales every run time by a percentage without reprogramming. Set your run times for peak summer, then reduce the percentage in spring and fall. Some controllers can adjust this automatically from weather data. Revisit it at least at each change of season.

Step 8: Return to Auto/Run and test

Turn the dial back to Run or Auto. If you leave it on a programming position, many controllers won’t water at all.

Then run each zone manually and watch for:

Also replace the backup battery if your controller uses one, so it keeps the time during power cuts.

Example schedule

A home with two lawn zones, one shrub zone and one drip zone might look like this. The minutes here are placeholders; use your own catch-cup results.

Program Zones Start time(s) Days
A (lawn) 1 (sprays), 2 (rotors) 4:00 a.m. and 5:00 a.m. (cycle and soak) Mon, Thu
B (shrubs) 3 6:00 a.m. Tue
C (drip veg) 4 6:30 a.m. Every 2 days

Each zone’s run time is set separately within its program.

Programming a smart controller

Smart controllers use the same building blocks but usually set them up through an app:

  • You describe each zone (plant type, soil, sun, head type, slope) and the controller suggests run times.
  • Weather data can skip watering after rain and adjust run times as temperatures change.
  • Some offer “flex” schedules that water when estimated soil moisture drops, rather than on fixed days.

Check the suggested schedule in the app against what you see in the garden for the first few weeks. See smart and IoT plant watering systems for more, or the best irrigation controller for 2026 if you’re shopping. Adding a rain sensor to a conventional controller gives you some of the same benefit.

Troubleshooting common programming problems

  • Zones water several times a night: too many start times in one program, or the same zone assigned to more than one program.
  • Nothing runs: dial not in Run/Auto, a rain delay or sensor active, no watering days selected, or the controller in “off” mode.
  • Watering at the wrong time: date or time wrong, or AM/PM mixed up after a power cut.
  • Programs overlapping and pressure dropping: stagger start times so one program finishes before the next begins.
  • Lawn soggy in spring or fall: seasonal adjust still at 100%. Lower it.

If you only water from an outdoor tap, the same principles apply to a hose timer; see how to set up a hose-end water timer.

The complete guide to automatic watering

Automatic Garden Watering Systems: How They Work and Are They Worth It?
Read the guide

Keep exploring

Guides from other topics

All topics →